Liftech Equipment Wire rope winch deformation of the main factors

Liftech Equipment Wire rope winch deformation there are three main factors: trauma, crushing,Wire rope winch kinking. This is primarily due to three factors that people use the right middle of the operation caused.
Trauma. This is mainly in the course of the rope with the other devices is not normal due to the contact, occurs in most cases is the rope pulleys in the chute, out of the baffle on the roll, both of which often makes the rope because dozens m rolling bad result overall scrapped. Ways to improve this situation is to improve the lifting equipment,electric wire rope hoists first pulley groove should set a reliable slip ring, while on the rope reel should not be too much slack, prevent the rope out of the rolling shutter causes bad.
Roll each rope is easy to roll on roll chaos after chaos, mutual strife, the sound when using that appear broken wire or rope partial flattening marks. This should be in accordance with the selection criteria pulley and roll angle can also be set up rows of thread or cord compression device to prevent the rope volumes appear chaotic phenomenon.
Kink. Twisted rope due to local produce permanent deformation is rope kink. After the kink rope strength will significantly reduce damage,strong electric winch
  affecting the normal use of wire rope.
We should pay attention to the care and maintenance of wire rope in daily use, reducing unnecessary losses.

lever hoist applications

lever hoist also known as rope pulling machine. In addition to the chain-like appearance and is not the same, but the material is not the same.ratchet lever hoist Wire rope pulling hoist only 3.2T.lever hoist largest collection science, nature as a whole, is a high-efficiency multi-purpose manual lifting traction machinery. Wire rope pulling hoist widely used in equipment installation shipbuilding, electric power, lever hoist manufacturers transportation, construction, mining, telecommunications and other sectors, goods lifting, mechanical traction.
lever hoist safety factor, long life, mainly nominal weight of 800 kg, 1600 kg, 3200 kg. Especially suitable for field use without power source status. lever hoist suitable for various occasions factories, mines, construction sites, docks, transportation, etc.,Lever hoist is the equipment installation, cargo lifting, stationary objects, lashing and ideal tool for traction, especially traction at any angle and in small venues, open operation and under no power supply, but also demonstrate its superiority.

Lift hoist features

Lift hoist an elevator hoist, comprising: a main cable is wound around the sheave; in order to drive the sheave and the rotor located on the sheave and the stator located on the fixed part of the hoist motor.
Lift hoistcharacterized in that said motor is a toroidal winding having a plurality of toroidal windings of the motor, the windings of the spiral-shaped rotor of the motor, are arranged on the inner peripheral surface of the cord constituting the first rotor wheel leaving a predetermined interval and disposed on the outer periphery of the inner surface of the first rotor to the second rotor,hand chain hoist the spiral-shaped part of the stator winding of the motor is fixed to the fixed portion of the hoist, and are accommodated in the first configuration the inner peripheral surface of the rotor in the space between the outer peripheral portion of the surface of the second rotor and the formation.

Lever hoist Introduction and Features

Lever hoist is a simple to use and easy to carry the manual lifting tool. Lever hoist can be enhanced traction, fall, calibration and other operations. Weight is generally no more than 50T. Widely used in shipbuilding, electric power, transportation, construction, mining,ratchet lever hoist telecommunications and other industry equipment installation, goods lifting, pulling and other parts.
Lever hoist is to get a line to match the load lever principle of traction by means of the human hand lever handle, a clamp body rotation acts on the movement of the load, drive the load operation. can be enhanced traction, down, calibration and other operations. If you configure a special device, not only can be used for non-linear traction operation, and can easily select the appropriate operating position,Lever hoist or with a smaller tonnage machines exponentially expand its load capacity, the load can be used for larger tonnage of several machines in parallel operations.

lever hoist Introduction and Features

lever hoist is to get a line to match the load lever principle of traction by means of the human hand lever handle, a clamp body rotation acts on the movement of the load, drive the load operation.lever block It has a compact, light weight, small size, easy to carry and effort, safety and reliability, long life, small pulling force on the rope wear small advantages. It can be enhanced traction, fall, calibration and other operations. If the configuration of a special device, not only can be used for non-linear traction operations, and can easily select the appropriate operating position, or with a smaller tonnage machines exponentially expand its load capacity,ratchet lever hoist the load can be used for large tonnage several machines side by side operations.
lever hoist Features
A unique elastic clutch technology, goods lift at any height
2, light chain device, lifting high
3, the new design style forged hook, hook top more secure, and has slowly bending performance

lever hoist maintenance methods

fter 1 after use lever hoist should be cleaned and coated with anti-rust oil, stored in a dry place.
maintenance and repair should be familiar to those who hoist mechanism to prevent the performance ratchet lever hoist of the machine do not understand the principles of free disassembly.
gear installed by drawing operations.
slotted nut installation, you should first turn the hand wheel clockwise direction, the ratchet, pressed brake friction plate mounted on the seat in the groove nut.
lever hoist inspection overhaul after washing, no-load and overload tests should be carried out to confirm working,Lever hoist reliable automatic rendezvous to use. Brake friction surfaces must be kept clean, non-contaminated sewage sludge.