SSDHL electric chain hoist

SSDHL electric chain hoist, After driving beam welding forming, overall length is shortened, driving beam in hand soldering shutout head plate, stiffeners, the weld longitudinal shrinkage, so that driving beam is shortened, more stiffeners, shorten more. A stiffener reached weld after the height requirements, approximately shrink about 1 mm, so the driving beams when given the total length, should be fully considered stiffeners number, plus the stiffener welding after contraction spacing vertical driving beam at both ends of the cut should be cut line outside the office, so that no dicing lines. after the above treatment, the total length of the driving beam to meet the requirements.

SSDHL electric chain hoist elevator main structure:

   SSDHL electric chain hoist elevator from moving parts, drives, upper unit, the central cabinet, composed of the lower unit.
    --- Moving parts from the hopper and special plate chain composition, HNE30 and under a single row chain, electric winch china with double chain.
    --- Drive using a variety of drive combo drive, (according to the user's actual needs). Equipped aircraft overhaul and railing on the drive platform. Divided left and right equipment installed two kinds.
    --- Upper unit mounted rail (double chain), backstop, the discharge port is equipped with anti-rubber sheet material back.
    The middle section of the middle part of the section is equipped with rails --- (duplexes), in order to prevent the chain swing work.
    Lower part of the device --- fitted with automatic tensioning device.