How to Install group hanging electric hoist?

Group hanging electric hoist can be used alone or with multiple synchronous lifting,hoist equipment use the control cabinet unified control, mainly due to the large oil tank welding in areas such as the following for you to explain, group hanging electric hoist how to install?

The first step is to open the container. Before installing the test machine, connect a wire rope drum wrapped in paper tape opened, scored before the test machine, test machine if you hurry, you may cause damaged rope rewind and stop frame. After this step, we need to note is to avoid direct contact with the wire rope and stop frame, otherwise easily lead limit switch failure, causing mini electric hoist is not working properly. The third step is to use the group hanging electric hoist when the body can not move or rotate along the mounting rod.
Then, to observe it, the work group hanging electric hoist the standard single-phase power supply is not running account,wire rope winch and you must use an outlet with a ground wire. If the state does not drop in electric hoist, electric hoist drum is coated with red paint in the last three laps rope can not be released. If continue down switch, wire rope on the rope drum will be rewound to make electric hoist operation upside down on the open, so that the limit switch will lose effect.
Finally look precautions, such as not to allow group hanging electric  lift hoist  to be exposed to rain or soaked in water, make sure that all cables hanging electric hoist with the group on rotating or hot parts to maintain an appropriate distance.