Electric chain hoist several control methods

Electric chain hoist several control methods

Wire rope hoist operation can be achieved when running up and down, left and right to run, before and after operation, six direction. Running up and down is the object to be lifted and landing procedures; run around refers to electric sports car under the influence of  Manual hoist  along the joist and move around; before and after running in single-beam traffic to walk on.

rope hoist control mode is divided into wireless control and wired control, Separate Sync free control and synchronization control.

Wireless control is the wireless remote operating device is a remote control receivers plus a wireless remote control operation buttons. Can achieve long-distance wireless operation, eliminating the need for wired controller troubles.

Wired control handle button has three: a six-point plus emergency switch (button were rising and falling, running around, back and forth), four-point plus emergency switch (four-point buttons were rising and falling and running around), two point plus emergency switch (two-point button a rising and falling two kinds). Wireline operations line length can chain hoist lifting height to be lengthened or shortened.

Separate Sync pair is controlled by wireless remote operation control, can achieve alone a control, you can achieve synchronous operation, convenient and practical, suitable occasion is very extensive.

Synchronization control is the group hanging one, you can achieve a remote device simultaneously control two or more  wire rope hoist  operation. Group hanging operation can realize the wireless remote control operation while lifting down, you can achieve alone a rise and fall, all powered by a remote operator action.