Wire rope pulling hoist maintenance

Wire rope winchmaintenance
1, each job is completed, we must first wipe the loose end of the rope on the adhesion of mud, dust or grease, loosen the jaw, out of wire rope, wire rope sequence will gather around the shelves, and wipe the length of wire rope, wire rope stored in dry place to prevent corrosion.
2 year deal at least four times a gourd maintenance treatment, such as diesel cleaning parts, and calcium-based grease lubrication.
3, when the internal movement poured into the mud, cement or other dirt, use a rinse, then clean diesel; cleaning, dry calcium-based grease on the grease; finally release the jaws, wipe with a clean cotton pliers mouth of grease and moisture.
4, when the jaws wear, carrying capacity is less than 80% of rated load, replace the jaw; when the rope diameter  of wire rope winch reduced by 10%, the rope should be replaced.